Top 5 Safety Features in Philips Mobile Cath & IR Trailers

Philips Mobile and Modular Cath Lab and IR Suite Rentals

Safety First—Even in a Parking Lot

Your temporary lab must meet the same infection-control, radiation-safety, and electrical standards as the room you just vacated. Atlas Medical designs our mobile cath and IR trailers to pass hospital inspections on day one, without costly add-ons or field retrofits.


Here are the five features risk-management teams ask about most—and how a Philips trailer answers each one.

1. Lead-Shielded Walls Certified to IEC 60601

Every wall panel, door, and window contains factory-installed lead sheeting that meets or exceeds 0.5 mm Pb equivalent. A licensed medical physicist performs an on-site shielding survey during installation and provides a signed report for your radiation-safety officer.


2. Positive-Pressure, HEPA-Filtered HVAC

A dedicated air-handling unit delivers laminar airflow (15–20 ACH) through H13 HEPA filters. The system keeps the procedure room under positive pressure relative to the corridor, minimizing airborne contaminants—an infection-control requirement for CMS and most state health departments.


3. Redundant Power & Ground-Fault Protection

Trailers tie into a 480 V, 3-phase, 200 A hospital feed protected by dual ground-fault interrupters. An on-board UPS offers 10-minute ride-through for critical electronics, and facilities can connect the unit to their emergency generator for seamless coverage.


4. Integrated Fire-Suppression & Early-Warning Alarms

An ABC dry-chemical extinguisher mounts inside the control area, while smoke and heat detectors link to both the hospital’s fire-alarm loop and the trailer’s local panel. All components comply with NFPA 99 and local code requirements.


5. One-Touch Dose-Management Suite

Philips DoseWise and ClarityIQ algorithms automatically adjust pulse rates, filter thickness, and image processing—reducing patient and staff dose without sacrificing image clarity. Real-time dose readouts appear on the fluoro console and are exported to your dose-tracking software for audit.


How These Features Translate to Daily Confidence

  • Infection-control sign-off happens in hours, not weeks.
  • Radiation-safety documentation slots straight into your RSO’s binder.
  • Staff onboarding focuses on clinical workflow, not equipment workarounds.


See the Safety Specs Firsthand

Scroll down to the Contact-Us form and provide us with a couple sentences describing your project. Within 1 business day we'll have a specialist reach out to further discuss your project.


One form, one day, and you’ll know exactly how a Philips mobile lab keeps patients—and staff—protected.


No, we’re not changing the world. But we help the healthcare providers that are.

Close-up portrait of a man with short gray hair and a neutral expression against a blurred background

Sean Schneider

Mobile Project Manager · Atlas Medical


About the Author

Say hello to Sean Schneider - our Mobile Project Manager at Atlas Medical. Sean has worked in the medical imaging industry for over 20 years, including 10 years with Atlas Medical. 


Sean has a knack for making complicated projects simple to understand. Around here, Sean's the man who keeps things moving smoothly.


When Sean isn't helping launch our mobile imaging units at new sites he enjoys spending time with his family, golf, and hockey.

Request a Mobile Imaging Solution

Our Services Include:

Medical lab category buttons

Mobile CT scanner installation at a hospital showing delivery, utility setup, and preparation for cl

Mobile CT Scanner Installation: From Delivery and Setup to Clinical Go-Live

By Jared Labtic • September 13, 2026
By the time a mobile CT scanner arrives at a hospital, much of the planning should already be complete. The site has been selected. Facilities has reviewed the proposed location. Power and connectivity requirements have been discussed. The hospital knows when temporary CT capacity needs to become available. But delivery is not the same as go-live. A mobile CT scanner installation still involves positioning the unit, connecting infrastructure, integrating the scanner with hospital systems, verifying equipment readiness, preparing technologists, and completing the hospital's own pre-clinical requirements. Understanding that sequence helps project teams avoid treating the arrival date as the same thing as the clinical start date. Hospitals evaluating temporary CT capacity can review Atlas Medical's mobile CT scanner solutions before building their deployment schedule. Atlas currently offers mobile CT systems from major OEMs and includes applications training and integration support as part of its turnkey approach.
Mobile cath lab unit showing the type of equipment and facility setup hospitals should consider when

What to Include in a Mobile Cath Lab RFP

By Jared Labtic • September 13, 2026
A hospital preparing to rent a mobile cath lab needs more than a price and an available trailer.  The hospital needs to know whether the temporary lab can support its procedures, fit the site, integrate with existing systems, arrive on schedule, support staff workflow, and remain available for the full project period. A well-written mobile cath lab RFP helps procurement teams compare vendors against the same requirements instead of evaluating proposals that describe completely different solutions. The RFP should therefore be developed with input from more than procurement alone. Cath lab leadership, facilities, IT, clinical engineering, project management, infection prevention, finance, and other appropriate hospital stakeholders may all have requirements that affect the temporary lab. Hospitals still defining the type of temporary solution they need can review Atlas Medical's mobile cath lab rental solutions before developing the RFP.

Cath Lab Applications Training: Preparing Clinical Teams for New Imaging Technology

By Jared Labtic • September 9, 2026
Installing or gaining access to a cath lab imaging system is only part of getting the room ready for clinical use.  The people operating the technology also need to understand how that particular system fits into their daily workflow. A clinical team may already have years of cath lab experience and still need time to become comfortable with a different interface, room controls, imaging modes, table and C-arm movements, image review tools, and system-specific workflows. That is where cath lab applications training becomes valuable. Rather than teaching cath lab fundamentals, applications training focuses on helping experienced clinical teams understand and effectively use the imaging technology available to them. Hospitals that need project-based support can explore Atlas Medical's imaging applications training and temporary technologist staffing .

Modular Cath Labs During Hospital Renovations: How to Maintain Cardiac Program Continuity

By Jared Labtic • September 8, 2026
A cath lab renovation creates an unusual planning challenge for hospitals: the project is designed to improve cardiac services, but completing it may temporarily take critical procedural space out of operation. The construction schedule is only part of the problem.  Hospital leaders also have to decide what happens to procedures, physicians, staff, patients, and workflows while the permanent lab is unavailable. A modular cath lab for hospital renovation can provide temporary procedural capacity on-site while work progresses inside the permanent facility. Atlas Medical specifically positions its modular cath lab rentals for renovations, temporary capacity, and projects where hospitals need to keep cases running. The key is to treat the modular lab as part of the renovation strategy—not as equipment that gets added after the construction plan is already finished.

Mobile CT Scanner Power Requirements: What Hospital Facilities Teams Should Plan For

By Jared Labtic • September 1, 2026
A mobile CT scanner may arrive on a trailer, but it still needs the electrical infrastructure required to operate advanced diagnostic imaging equipment. For hospital facilities and engineering teams, that makes power one of the first technical questions to resolve before delivery. Atlas Medical notes that a typical mobile CT unit requires 480V, 3-phase power . However, hospitals should not treat that figure as a universal specification for every trailer or scanner. The electrical requirements should always be confirmed for the specific mobile CT unit assigned to the project. Getting that information early gives facilities teams time to evaluate the site's existing electrical capacity, determine whether electrical work is necessary, coordinate responsibilities, and have the connection ready before the mobile unit arrives.

CT Applications Training: Building Confidence With New Scanner Technology

By Jared Labtic • August 30, 2026
An experienced CT technologist already understands patient care, positioning, scan preparation, and the clinical demands of a busy imaging department. What changes when the scanner changes is the technology used to perform that work. A new interface, different protocol structure, unfamiliar reconstruction tools, or a change in manufacturer can create a learning curve even for an experienced team. CT applications training gives technologists hands-on, system-specific support so they can understand how the scanner fits into their department's clinical workflow. Hospitals may need this support when installing a scanner, replacing older equipment, changing OEM platforms, introducing advanced applications, opening a temporary imaging location, or onboarding additional staff. Atlas Medical provides imaging applications training and temporary technologist staffing for hospitals and imaging providers with project-based clinical support needs.